Fabricating Container Homes In The Philippines Over Shipping Container Conversions.

People are always pushing the recycling of shipping containers as the main concern in the container home building circuit but over here in the Philippines they are rather battered and over priced in general.

You can find prices fluctuate depending on the time of year and even old containers seem to survive here decades after they should have been scrapped, bruised battered and the rust is cut out and new plates welded in but its a market people don’t realise exists that see’s the old containers surviving. International shipping standards keep the containers at a high quality standard but we live in the Philippines with over 7,000 islands how much goods move island to island?

This is why we see inflated prices on old containers that go back as far as the 70s and 80s is the fact they are used between islands and not internationally. If you see the state of them they would never leave the docks on an international vessel. But its this that creates our problem as a good container is always in demand as even the oldest roughest container never seems to see an end of life but simply patched up and shipped off.

Which got me back to a system I used in the UK before which is basically a frame setup and you simply slot the wall sections in. Being open already means that you can then adapt sections from adding staircases,windows and doors to complete sides being left open as unlike shipping containers these are built for the job of container homes. In essence its moving away from shipping containers into modular home construction.

image

Makes a bit more sense when you see the photo above as these can be manufactured on site or in a factory depending where the final location will be adding to that they are still stackable and get used more than people realise already in places like the UK. Temporary clinics,doctors surgeries, classrooms are all commonly using a similar system and I am looking at this as being the serious way forward with construction in the Philippines due to the costs of buying second hand units. No issues of toxic floors or damaged side panels but simply starting from the frame upwards.

But what about the walls? This is where the tricky bit comes in but is also how its practical. Getting the stuff here may not be as easy as I would like but basically I am looking for foam panels that can either be injected with foam or preformed foam panels that we can glue cladding sheets to externally. Light weight and extremely easy to construct with as well as strong and fire retardant.